LevelOne FGL-2870 - Manual (Page 83)

Basic Configuration
3-29
3
Downloading Configuration Settings from a Server
You can download the configuration file under a new file name and then set it as the
startup file, or you can specify the current startup configuration file as the destination
file to directly replace it. Note that the file “Factory_Default_Config.cfg” can be
copied to the TFTP server, but cannot be used as the destination on the switch.
Web – Click System, File Management, Copy Operation. Select “tftp to
startup-config” or “tftp to file” and enter the IP address of the TFTP server. If you
download from an FTP server, enter the user name and password for an account on
the server. Specify the name of the file to download and select a file on the switch to
overwrite or specify a new file name, then click Apply.
Figure 3-13 Downloading Configuration Settings for Startup
If you download to a new file name using ftp/tftp to startup-config or ftp/tftp to file, the
file is automatically set as the start-up configuration file. To use the new settings,
reboot the system via the System/Reset menu.
Note: You can also select any configuration file as the start-up configuration by using the
System/File/Set Start-Up page.
Figure 3-14 Setting the Startup Configuration Settings