LevelOne FGL-2870 - Manual (Page 538)

Command Line Interface
4-172
4
Example
show network-access mac-filter
Use this command to display information for entries in the MAC filter tables.
Syntax
show network-access mac-filter [filter-id]
filter-id - Specifies a MAC address filter table. (Range: 1-64)
Default Setting
Displays all filters.
Command Mode
Privileged Exec
Example
Console#show network-access mac-address-table
---- ----------------- --------------- --------- -------------------------
Port MAC-Address RADIUS-Server Attribute Time
---- ----------------- --------------- --------- -------------------------
1/1 00-00-01-02-03-04 172.155.120.17 Static 2001y01m00d06h32m50s
1/1 00-00-01-02-03-05 172.155.120.17 Dynamic 2001y01m00d06h33m20s
1/1 00-00-01-02-03-06 172.155.120.17 Static 2001y01m00d06h35m10s
1/3 00-00-01-02-03-07 172.155.120.17 Dynamic 2001y01m00d06h34m20s
Console#
Console#sh network-access mac-filter
Filter ID MAC Address MAC Mask
--------- ----------------- -----------------
1 00-00-01-02-03-08 FF-FF-FF-FF-FF-FF
Console#