LevelOne FGL-2870 - Manual (Page 302)

Configuring the Switch
3-248
3
Displaying LLDP Remote Information Details
Use the LLDP Remote Information Details screen to display detailed information
about an LLDP-enabled device connected to a specific port on the local switch.
Field Attributes
• Local Port – The local port to which a remote LLDP-capable device is attached.
• Chassis Type – Identifies the chassis containing the IEEE 802 LAN entity
associated with the transmitting LLDP agent. There are several ways in which a
chassis may be identified and a chassis ID subtype is used to indicate the type of
component being referenced by the chassis ID field. (See Table 3-15, ’Chassis ID
Subtype," on page 3-244.)
• Chassis ID – An octet string indicating the specific identifier for the particular
chassis in this system.
• Port Type – Indicates the basis for the identifier that is listed in the Port ID field.
• Port Description – A string that indicates the port’s description. If RFC 2863 is
implemented, the ifDescr object should be used for this field.
• Port ID – A string that contains the specific identifier for the port from which this
LLDPDU was transmitted.
• System Name – An string that indicates the system’s assigned name.
• System Description – A textual description of the network entity.
• System Capabilities Supported – The capabilities that define the primary
function(s) of the system. (See Table 3-16, ’System Capabilities," on page 3-245.)
• System Capabilities Enabled – The primary function(s) of the system which are
currently enabled. (See Table 3-16, ’System Capabilities," on page 3-245.)
• Management Address – The IPv4 address of the remote device. If no
management address is available, the address should be the MAC address for the
CPU or for the port sending this advertisement.
Table 3-17 Port ID Subtype
ID Basis Reference
Interface alias IfAlias (IETF RFC 2863)
Chassis component EntPhysicalAlias when entPhysClass has a value of ‘chassis(3)’ (IETF RFC 2737)
Port component
EntPhysicalAlias when entPhysicalClass has a value ‘port(10)’ or ‘backplane(4)’
(IETF RFC 2737)
MAC address MAC address (IEEE Std 802-2001)
Network address networkAddress
Interface name ifName (IETF RFC 2863)
Agent circuit ID agent circuit ID (IETF RFC 3046)
Locally assigned locally assigned