LevelOne FGL-2870 - Manual (Page 457)

SNMP Commands
4-91
4
Related Commands
snmp-server location (4-91)
snmp-server location
This command sets the system location string. Use the no form to remove the
location string.
Syntax
snmp-server location text
no snmp-server location
text - String that describes the system location.
(Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Related Commands
snmp-server contact (4-90)
Console(config)#snmp-server location WC-19
Console(config)#