LevelOne FGL-2870 - Manual (Page 612)

Command Line Interface
4-246
4
Related Commands
auto-traffic-control alarm-clear-threshold (4-239)
auto-traffic-control action (4-240)
auto-traffic-control release-timer (4-237)
snmp-server enable port-traps atc multicast-control-release
This command sends a trap when multicast traffic falls beneath the lower threshold
after a storm control response has been triggered and the release timer expires. Use
the no form to disable this trap.
Syntax
[no] snmp-server enable port-traps atc multicast-control-release
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet)
Example
Related Commands
auto-traffic-control alarm-clear-threshold (4-239)
auto-traffic-control action (4-240)
auto-traffic-control release-timer (4-237)
show auto-traffic-control
This command shows global configuration settings for automatic storm control.
Command Mode
Privileged Exec
Example
Console(config)#interface ethernet 1/1
Console(config-if)#snmp-server enable port-traps atc
multicast-control-release
Console(config-if)#
Console#show auto-traffic-control
Storm-control: Broadcast
Apply-timer (sec) : 300
release-timer (sec) : 900
Storm-control: Multicast
Apply-timer(sec) : 300
release-timer(sec) : 900
Console#