Figure 3-87, Dhcp snooping port configuration – LevelOne FGL-2870 User Manual
Page 202
Configuring the Switch
3-148
3
Command Attributes
• Trust Status – Enables or disables a port as trusted.
Web – Click DHCP Snooping, Port Configuration. Set any ports within the local
network or firewall to trusted, and click Apply.
Figure 3-87 DHCP Snooping Port Configuration
CLI – This example shows how to enable the DHCP Snooping Trust Status for ports
.
Console(config)#interface ethernet 1/5
Console(config-if)#ip dhcp snooping trust
Console(config-if)#end
Console#show ip dhcp snooping
Global DHCP Snooping status: disable
DHCP Snooping Information Option Status: disable
DHCP Snooping Information Policy: replace
DHCP Snooping is configured on the following VLANs:
Verify Source Mac-Address: enable
Interface Trusted
---------- ----------
Eth 1/1 No
Eth 1/2 No
Eth 1/3 No
Eth 1/4 No
Eth 1/5 Yes
.
.
.