LevelOne FGL-2870 - Manual (Page 221)

Port Configuration
3-167
3
Web – Click Port, LACP, Aggregator. Set the Admin Key for the required LACP
group, and click Apply.
Figure 3-97 LACP Aggregation Group Configuration
CLI – The following example sets the LACP admin key for port channel 1.
Displaying LACP Port Counters
You can display statistics for LACP protocol messages.
Console(config)#interface port-channel 1 4-220
Console(config-if)#lacp actor admin-key 3 4-253
Console(config-if)#
Table 3-8 LACP Port Counters
Field Description
LACPDUs Sent Number of valid LACPDUs transmitted from this channel group.
LACPDUs Received Number of valid LACPDUs received on this channel group.
Marker Sent Number of valid Marker PDUs transmitted from this channel group.
Marker Received Number of valid Marker PDUs received by this channel group.
Marker Unknown Pkts Number of frames received that either (1) Carry the Slow Protocols
Ethernet Type value, but contain an unknown PDU, or (2) are addressed
to the Slow Protocols group MAC Address, but do not carry the Slow
Protocols Ethernet Type.
Marker Illegal Pkts Number of frames that carry the Slow Protocols Ethernet Type value, but
contain a badly formed PDU or an illegal value of Protocol Subtype.