LevelOne FGL-2870 - Manual (Page 420)

Command Line Interface
4-54
4
terminal escape-character
This command sets the escape character used to break display output. Use the no
form to restore the default setting.
Syntax
terminal escape-character {character | ASCII-number ASCII-number}
no terminal escape-character
• characters – The escape character.
• ASCII-number – ASCII decimal equivalent of the escape character.
(Range: 0-255)
Default Setting
27 (ASCII equivalent of the backspace key)
Command Mode
Privileged Exec
Command Usage
Both Ctrl-C and the escape character specified by this command can be used
to break off screen output. Ctrl-C can also be used to break off the current
command-line input string.
Example
terminal terminal-type
This command specifies the terminal type connected to the console port. Use the no
form to restore the default setting.
Syntax
terminal terminal-type {ansi-bbs | vt-100 | vt-102}
no terminal terminal-type
• ansi-bbs – ANSI-BBS
• vt-100 – VT100
• vt-102 – VT102
Default Setting
VT100
Command Mode
Privileged Exec
Command Usage
This command specifies the terminal type connected to the console port, or
the terminal emulation type used by a computer connected to the console port.
Console#terminal escape-character *
Console#