Yokogawa Integral Oxygen Analyzer ZR202 - Manual (Page 2)

i IM 1M12A01-05E
IM 11M12A01-05E
6th Edition: Sep. 2006 (YK)
All Rights Reserved, Copyright © 2000, Yokogawa Electric Corporation
Introduction
The EXAxt ZR series of Integrated-type Zirconia High-temperature Humidity Analyzers
was developed for humidity control in various industrial processes. There are versions
for virtually every application.
Optional accessories are also available to improve measurements and automate calibra-
tion. An optimal control system can be realized by adding appropriate options.
This instruction manual describes installation, operator, inspection and maintenance for
almost all of the equipment related to the EXAxt ZR. You may skip any section(s) on
the equipment which is/are not included in your system.
Regarding the HART communication Protocol, refer to IM 11M12A01-51E.
IM11M12A01-51E is titled ''Model EXAxt ZR series HART protocol''.
The separate version (sensor and converter separated) is described in IM 11M12A01-
03E.
<Before using the equipment, please read any related descriptions in this manual for the
equipment and the system you have, on appropriate use and operation of the EXAxt
ZR.>
Models and descriptions in this manual are listed below.
Description in this manual
Model Product Name Specification Installation Operation Maintenance CMPL
ZR202G Integrated type Oxygen Analyzer s s s s s
ZO21R-L Probe protector s s
ZA8F Flow setting unit (for manual calibration use) s s s
ZR20H Automatic Calibration unit s s s s
- Calibration gas unit case (Part No. E7044KF) s s
- Check valve (Part No. K9292DN, K9292DS) s s
- Dust filter for the detector (Part No. K9471UA) s s s
ZO21S Standard gas unit s s s s
T.Int.1E
CMPL: Customer Maintenance Parts List