Yokogawa IR200 - Manual (Page 100)

Revision Record
Manual Title : IR200 Infrared Gas Analyzer
Manual Number : IM 11G02M01-01E
Edition Date Remark (s)
1s t Oct. 2002 Newly published
2nd Aug. 2006 Fully revised due to style change to S3
P. v., Added "After-Sales Warranty".
Section 2.1, "Description of each unit": Changed Fig. 2-1.
Section 3.4, (6), "Example of sampling system configuration": Changed Fig. 3-2
Section 5.1, "Name and description of operation panel": Changed Fig. 5-1.
Section 5.3, (3), "Contents of measured channel (CH)": Changed the table.
Section 6.2.2, Added Section "Setting of calibration gas".
Section 9.1, (1), "Standard specifications": Changed table "Measurable gas components and
measuring range".
Section 9.1, (4), "Performance": Changed table "Interference from other gases".
Section 9.2, "Model and Suffix codes": Changed table.
Section 9.2, "Measurable component and range - availability check table-": Changed Tables 1,
5 and 6.
Section 9.3, "External Dimensions": Changed drawing, and added NO 2 /NO converter's
specifications and external dimensions.
3rd Jul. 2007 Section 3.4, "Sampling," (3) "Preparation for standard gas": Partially changed the table.
Section 5.2, "Overview of display and operation panel": Partially changed the figure.
Section 6.1, "Changeover of range": Partially changed the figure.
Section 6.2, "Calibration setting": Added descriptions.
Section 6.3.1, "Setting of alarm values": Changed descriptions.
Section 6.4.1, "Auto calibration": Partially changed the figure.
Section 6.6, "Peak alarm setting": Partially changed descriptions in the figure.
Section 7.2, "Daily check and maintenance procedures": Partially changed Table 7-1, Maintenance and
check list.
Section 8.1, "Error message": Partially changed the figure.
Section 9.1, "Specifications," Safety and EMC conforming standards: Changed descriptions and
added Note.
Section 9.2, "Model and Suffix codes": Deleted Footnote 7 and changed descriptions of Footnote 8
(former 9).
Section 9.3, "External Dimensions," Dedicated Zirconia O 2 Sensor (to be purchased separately):
Added "Safety and EMC conforming standards" descriptions and revised "Model and Suffix code"
table.