Name and description of each part, 1 description of each unit – Yokogawa IR200 User Manual
Page 12
2 - 1
IM 11G02M01-01E
2.1 Description of each unit
2. NAME AND DESCRIPTION OF EACH PART
Fig. 2-1 Name and description of each unit
Name Description
(1) Handle
Draws the analyzer unit from the case.
(2) Power switch
Turns ON/OFF this analyzer.
(3) Display/Operation panel
Liquid crystal display and keys for various operational settings are arranged.
(4) Sampling gas inlet
Port for connecting the sample gas injection pipe
(5) Sampling gas outlet
Port for connecting the pipe for discharging the gas after analysis
(6) Purge gas inlet
Port for connecting the purge gas pipe
(7) Terminal block 1
Analog output terminals
(8) Terminal block 2
O
2
analyzer signal and contact input terminals
(9) Terminal block 3
Contact input/output terminals
(10) Terminal block 4
Contact output terminal
(11) Terminal block 5
Alarm output terminal
(12) Power inlet
Used to connect the power cable.
(13) Connector for
Used to connect the communication cable.
communication
POWER
MODE
INFRARED GAS ANALYZER
ESC
ENT
ZERO
SPAN
(1) Handle
(2) Power switch
(3) Display and operation panel
(11) Terminal block 5
(10) Terminal block 4
(7) Terminal block 1
(8) Terminal block 2
(9) Terminal block 3
(6) Purge gas inlet
(5) Sampling gas outlet
(4) Sampling gas inlet
(12) Power inlet
(13) Connector 2