Yokogawa IR200 - Manual (Page 30)

5 - 1
IM 11G02M01-01E
5. DESCRIPTION OF DISPLAY AND OPERATION PANEL
This section describes the display and operation panel of the gas analyzer. It also explains the name and
description of function on the operation panel. See Fig. 5-1.
5.1 Name and description of operation panel
Fig. 5-1 Name and description of operation display and panel
MODE ESC ZERO
ENT SPAN
INFRARED GAS ANALYZER
SPAN
ZERO
ENT
ESC
POWER
MODE
(2)SIDE key
(1)MODE key
(3)UP key (5)ESCAPE key
(6)ENTRY key
(7)ZERO key
(8)SPAN key
(4)DOWN key
• Display : The measurement screen and the setting items are displayed.
• Controls : The configuration is as shown below.
Controls
Display
Power switch
Name Description Name Description
(1) MODE key
(2) SIDE key
(3) UP key
(4) DOWN key
Used to switch the mode. (5) ESCAPE
key
(6) ENTRY
key
(7) ZERO key
(8) SPAN key
Used to change the selected
item (by moving the cursor)
and numeral digit.
Used to change the selected
item (by moving the cursor)
and to increase numeral value.
Used to change the selected
item (by moving the cursor)
and to decrease numeral value.
Used to return to a previous screen
or cancel the setting midway.
Used for confirmation of selected
items or values, and for execution
of calibration.
Used for zero calibration.
Used for span calibration.