Yokogawa IR200 User Manual

Page 33

Advertising
background image

5 - 4

IM 11G02M01-01E

(2) Setting/selection screen

The setting/selection screen is configured as shown below:

• In the status display area, the current status is displayed.

• In the message display area, messages associated with operation are displayed.

• In the setting item and selection item display area, items or values to be set are displayed,

as required. To work on the area, move the cursor to any item by using

, and

keys.

Cursor

Status display area

Message display area

Setting item/selection item
display area

O

2

correction concentration average value:

CH (component) where “ ** ” is displayed as “ CO” in the component display and O

2

average value, a value obtained by averaging O

2

conversion concentration value or O

2

concen-

tration value in a fixed time is output every 30 seconds.

Averaging time can be changed between 1 minute and 59 minutes or 1 hour and 4 hours accord-
ing to the average time settings (See 6.7 Parameter setting).

(The set time is displayed as “1h” , for instance, in the Range display.)

* The measurement ranges of O

2

correction concentration value and O

2

correction concentration

average value are the same as that of the measuring components. Also, the measurement range
of O

2

average value is the same as that of O

2

.

Fig. 5-4 Display screen

AV
CV

AV
CV

Advertising