Yokogawa IR200 - Manual (Page 52)

6 - 17
IM 11G02M01-01E
6.4.2 Forced stop of auto calibration
This mode is used to cancel the auto calibration forcedly.
1. In the User mode that is displayed, point
the cursor to “Setting of Auto Calibra-
tion” by pressing the
or key.
Press the
ENT
key.
2. In the “Setting of Auto Calibration” item
selection screen that appears, point the
cursor to “Stop Auto Calibration” by
pressing the
or key. Press the
ENT
key.
3. “Stop Auto Calibration” is inverted. A
message appears, prompting you to
verify that you want to cancel or continue
auto calibration. To cancel the auto
calibration forcibly, press the
ENT
key. If
you press the
ESC
key, auto calibration is
cancel (not stopped).
( )
ENT
( )
ENT