Yokogawa IR200 - Manual (Page 66)

6 - 31
IM 11G02M01-01E
• Moisture interference compensation adjustment screen
* See “7.4 Moisture interference compensation
adjustment” for details of moisture interference
compensation adjustment procedure.
• Backlight Timer setting screen
Automatic OFF of the backlight in the LCD can
be selected. When the length of time set here
elapses after the measurement screen appears,
the backlight is automatically turned off.
Only when "ON" is selected, the time until
automatic OFF is displayed. Press the key
in this state, and you can change the time until
auto backlight OFF.
Press an arbitrary key while the backlight is kept
off, and the backlight comes on again.
Description of backlight timer setting screen
( )
ENT
( )
ENT
End of moisture interference
correction adjustment
By setting the effect of moisture content in
measured gas on this screen, the value of the
effect is subtracted to find the measurement value.
Adjustment is carried out by one of the following
methods.
• Select a desired channel (CH) and change the
• value displayed at right.
Select ALL and perform auto calculation for
all the channels in batch.
Select RESET, and the interference compensation
settings for all the channels are reset to 0.
Description of moisture interference
compensation adjustment screen