HP Integrity NonStop J-Series - Manual (Page 146)

Web ViewPoint User Guide Version 5.14 - 528226-014 146
5.5.3.1 EVENTS QUERY SETTINGS PAGE
This is where you define the content to be displayed on the Events Query Window.
A. Profile: This option comes into play when a user wishes to save the Event Settings on the NonStop.
These profiles are stored and associated with the UserID used to create the profile.
Further, the profiles are section specific, i.e. profiles for Event Live are separate from those of Event Query and
those of Web Dash. By default, no profiles are populated. On selecting an available profile, the Events Settings
screen is populated with the values specified in the profile.
Add/Update: Profiles can be added/updated by specifying the profile name in the “Save Profile as:” textbox
and clicking on the “Save” button. The Events Settings on the current screen are stored on to the NonStop
using the supplied user name.
Note: The changes to Events Settings are saved to the profile only when “Save” is clicked. If a “Submit” is
done, then events are displayed based on the current settings on the screen rather than those from the
profile. These settings are “remembered” only for the current session.