HP Integrity NonStop J-Series - Manual (Page 41)

Web ViewPoint User Guide Version 5.14 - 528226-014 41
2.7 PARAM & ASSIGN LIST
This section describes the detailed PARAMs & ASSIGNs used to configure the Web ViewPoint objects. All the
required & optional PARAMs & ASSIGNs are briefly defined below
.
2.7.1 FOR PROCMAN OBJECT
PROCMAN object is the process manager that creates and manages the listener process, Web ViewPoint and the
related plug-in processes. The assigns and params that are to be passed to the PROCMAN object are specified in
STRTWVP file.
 ASSIGN PROGCONFn, <filename> [STRTWVP]
Up to 20 programs can be configured to be managed by the process managers. The configuration file for each
of the programs is specified using the PROGCONFn assign. n can have integral values from 1 to 19 (both
inclusive). At least one assign PROGCONFn is required.
 PARAM WVPSECUREHTTP [ON|OFF] [STRTWVP, WVPCONF]
This is an optional PARAM. By specifying this PARAM Web ViewPoint operates in a secure communication via
SSL;there by providing confidentiality, integrity and identity. This PARAM should be placed right at the
beginning of the STRTWVP file and also in each Plug-in Object Section in WVPCONF. See
Section 5.7.2 for more
details.
Note: If you are setting this PARAM, you should add ‘CLEAR PARAM WVPSECUREHTTP’ at the bottom of the
STRTWVP file, to clear the PARAM.
Example:
 PARAM WVPSECUREFTP [ON|OFF] [WVPCONF]
This is an optional PARAM. By specifying this PARAM Web ViewPoint provides secure FTP functions for
Operations--> CCM only. This PARAM should be placed in the WVPCONF file under the WEBVPT5 object. See
Section 5.7.3 for more details.