HP Integrity NonStop J-Series - Manual (Page 44)

Web ViewPoint User Guide Version 5.14 - 528226-014 44
 PARAM IM-ACCESS [YES|NO] [WVPCONF]
This tells the WEBVPT5 shell whether to display the IM icon on the toolbar. If IM-ACCESS is set to NO, the IM
functionality is disabled for all users within Web ViewPoint. If set to YES, then the access is controlled by the
access control lists specified through the administration section of Web ViewPoint (if ENFORCE-SECURITY is set
to YES). The default value is YES.
 PARAM FTP-ACCESS [YES|NO] [WVPCONF]
This tells the WEBVPT5 shell whether to display the FTP icon on the toolbar. If FTP-ACCESS is set to NO, the
FTP functionality is disabled for all users within Web ViewPoint. If set to YES, then the access is controlled by
the access control lists specified through the administration section of Web ViewPoint. (if ENFORCE-SECURITY
is set to YES). The default value is YES.
 PARAM TACL-ACCESS [YES|NO] [WVPCONF]
This tells the WEBVPT5 shell whether to display the Terminal Emulator icon on the toolbar. If TACL-ACCESS is
set to NO, the Terminal Emulator functionality is disabled for all users within Web ViewPoint. If set to YES,
then the access is controlled by the access control lists specified through the administration section of Web
ViewPoint. (If ENFORCE-SECURITY is set to YES). The default value is YES.
 PARAM REPORT-TCP-ERROR <YES|NO> [WVPCONF]
This specifies if Web ViewPoint should report the state (4003) returned by the Parallel TCPIP library.
 PARAM REPORT-TCP-ERROR-INTERVAL <nn> seconds [WVPCONF]
This specifies the interval for which Web ViewPoint should suppress duplicate messages regarding the state
returned by the Parallel TCPIP library. This param is ignored when REPORT-TCP-ERROR is set to NO.
 PARAM JAPANESESUPPORT [YES|NO] [WVPCONF]
This specifies whether the Japanese character support is required for displaying of EMS messages in Events
Live and Query. If this param is not specified, the default value is NO. If the param is set to YES, then Web
ViewPoint supports multibyte code and when it is set to NO, it supports 1 byte code.
 PARAM TELNET-PORT <port-number> [WVPCONF]
This specifies the Telnet port to which the Terminal Emulator should connect to. This port corresponds to the
port that TELSERV is connecting to. The default value is 23.
 PARAM EVT-CPU-BUSY-CAP <number> [WVPCONF]
This specifies in terms of percentage the limit to which the CPU would be used. Thus if EVT-CPU-BUSY-CAP is
set at 20, then 20% of the CPU is allocated for processing the events. If this param is not specified, the system
decides the amount of CPU to be utilized. If this param is set to 0, the CPU limit is turned off.
 PARAM AUTOLICENSE [ON/OFF] [WVPCONF]
Using this param the user can specify if he wants to allow Web ViewPoint to automatically license itself when
connected to the internet. If the param is set to ON, then the user is taken to a registration page the first time
user opens Web ViewPoint. If the param is set to OFF then the user will have to email the Web ViewPoint
team to generate a manual license. Web ViewPoint needs to be activated before use so please absolutely
follow that Email’s instruction. This parameter is case sensitive. Be sure to enter it in ALL CAPS; “PARAM
autolicense off” will not work, whereas “PARAM AUTOLICENSE OFF” will work as expected.
 PARAM MAXEVENTS<number> [WVPCONF]
This allows the user to specify the maximum number of events to store in the browser for Events Live and
Events Query actions. Use this param to control overhead of Events on the browser. In Events Live, the screen
will refresh after MAXEVENTS have been shown and will retain the last “n” events and continue to show
events. (“n” depends on the value user inputs for “Event display size” )
Default value 500