HP Integrity NonStop J-Series - Manual (Page 67)

Web ViewPoint User Guide Version 5.14 - 528226-014 67
SETUP OPTIONS:
Adding and Deleting Owners/Subsystems:
To add a new owner, click on the plus (+) icon next to the Owner column header, this opens a pop-up with a text
box to enter the name that you would like to give to the new owner.
In case of adding a new subsystem, click the plus (+) icon, next to the Subsystem column header. This will open a
pop-up with the current owner’s name and a textbox to enter the name that you would like to give to the new
subsystem.
Save: Adds the Owner to the database.
Save & New: Adds the Owner and clears the textbox so that you may enter another Owner.
Cancel: If you decide not to add an Owner you can close the popup by clicking on the Cancel button.
To delete an Owner, click the delete icon next to the Owner that you wish to delete.
Note: Follow the same instructions as above for adding/deleting a Subsystem.
Adding and Deleting Events
To add a new event, click the plus (+) icon, next to the Event column header, this will open a pop-up with a list of
existing Owners and another list of their Subsystems. It will also have text boxes for Event Number, Cause, Effect,
Recovery, and Detail. By default, the Increment Event # checkbox is enable, which means that the Event # field will
be read-only and pre-populated with the next Event number in the selected Owner’s, selected Subsystem.
If you wish to enter your own Event number then uncheck the checkbox and the Event # field will become
writable. Enter information in all text boxes, then press the Save button at the bottom of the screen. Clicking the
Save & New button will save the event and clear the text-fields so that you may enter more events.