Festo Контроллер позиционирования CPX-CMAX - Manual (Page 125)

5. Diagnostics and error handling
5−3
Festo P.BE−CPX−CMA X−SYS−EN en 0908NH
5.1 Summary of diagnostics options
The CMAX supports a number of different options for diagĆ
nostics and error handling with the CPX terminal.
A summary is shown in Tab. 5/1.
Access/
function Diagnostic
options Brief description Detailed
description
Local
Display on the
device LED display The LEDs directly indicate the operating
and error statuses.
Fast diagnostics on site" Section 5.3
Display /
7−segment display The operating status and any error
messages are shown on the display.
Fast on site" diagnostics with status
and error detection Section 5.4
CPX−MMI The CPX module diagnostics 1) can be
displayed on the CPX handheld terĆ
minal.
Description of the
operator unit
Local
with PC (e.g.
during comĆ
missioning). FCT with CMAX
plug−in Plain−text display of all diagnostic inĆ
formation during commissioning and
servicing. Full access to CMAX diagnosĆ
tic functions. Help for FCT CMAX
plug−in
CPX−FMT The CPX module diagnostics 1) can be
displayed with the CPX−FMT.
Help for CPX−FMT
PLC
via I/O data Module input and
output data Diagnostic information is constantly
being transmitted in the SCON status
byte (e.g. actual values, WARN and
FAULT bits, etc.). Direct access to the
status (e.g. current position) and diagĆ
nostic status via the CPX node. Section 4.5, CMAX
communication proĆ
file" description
CPX status bits,
I/O diagnostic
interface The CPX module diagnostics 1) are reĆ
ported at the CPX node. Optimum inĆ
tegration in the CPX module concept.
CMAX communicaĆ
tion profile" descripĆ
tion
PLC
via communiĆ
cation profile FHPP diagnostics Diagnostic parameters, diagnostics
memory CMAX communicaĆ
tion profile" descripĆ
tion
1) In the CPX diagnostics, only the CMAX malfunction groups are displayed.
Tab. 5/1: Diagnostics options