Festo Контроллер позиционирования CPX-CMAX - Manual (Page 52)

2. Fitting and pneumatic installation
2−22
Festo P.BE−CPX−CMA X−SYS−EN en 0908NH
2.5 Mounting the CASM sensor interface
Mount the CASM−... sensor interface on an even surface with
two M4 screws and one retaining washer each. See Fig. 2/7.
The
symbol marks the position of the mounting screws.
The outer mounting screw also serves for earthing (
1
).
Tightening torque: 2 Nm.
1
Mounting screw
(connect
earthing)
S1 S2
1
Approx. 126 mm
Approx.
30
mm
Fig. 2/7: Mounting the CASM
Mounting on H−rails as per EN 60715 is possible with
mounting kit CP−TS−HS35. See Fig. 2/8.
1
H−rail 1
Fig. 2/8: Mounting the CASM on H−rail