Festo Контроллер позиционирования CPX-CMAX - Manual (Page 17)

Contents and general safety instructions
XV
Festo P.BE−CPX−CMA X−SYS−EN en 0908NH
This description contains information on the following
modules and components of the positioning system:
Module/component type Description
CMAX−C1−1 CMAX axis controller with 7−segment display as well as an axis
interface to the VPWP.
The CMAX is a CPX module (technology module) in a CPX terminal.
VPWP−... VPWP proportional directional control valve with connections to the
CMAX and to the displacement encoder or sensor interface.
The position measuring system or sensor interface is connected to
the VPWP.
Additional digital output with a load voltage supply for activating a
brake or clamping unit.
CASM−S−D2−R3
CASM−S−D3−R7
Sensor interfaces with a connection to the VPWP, for connecting
special position measuring systems to the axis string:
Ĉ analogue, absolute displacement encoders (potentiometers)
Ĉ digital, incremental displacement encoders
DGCI−...
DGP(L)−... with
MLO−POT−...−TLF
DNCI−...
DNC−... with
MLO−POT−...−LWG
DNCM−...
DSMI−...
Enabled drives with position measuring systems: 1)
Ĉ Linear drive with permanently integrated position measuring
system.
(digital, absolute)
Ĉ Linear drive with external position measuring system
(potentiometer, absolute)
Ĉ Standard cylinder with integrated position measuring system
(encoder, incremental)
Ĉ Standard cylinder with external position measuring system
(potentiometer, absolute)
Ĉ Standard cylinder with external position measuring system
(potentiometer, absolute)
Ĉ Semi−rotary drive with integrated position measuring system
(potentiometer, absolute)
1) Support for other drives in preparation
Tab. 0/2: Overview of positioning system modules and components