Konica Minolta bizhub PRESS C8000e - Manual (Page 144)

bizhub PRESS C8000 5-10
5.3 Making a Multiple Page Signature Booklet: Booklet 5
8
Press the desired binding position key.
% Press [Left Bind] or [Right Bind] if you want to change the output order.
9
Press [OK] to complete the setting.
% To restore the previous setting, press [Cancel].
% To cancel the Booklet function with the current setting saved, press [Function OFF].
10
Press [OK] on the Application Screen.
The Booklet icon and key will be displayed under [Application] on the Copy Screen. Use this key to di-
rectly jump to the setting screen, if any setting change is desired.
11
Select the tray loaded with paper for the body sets in step 2.
% The paper tray for the body sets is automatically selected as default. If you also select [Cover With
Copy Sheet] or [Cover With Blank Sheet] in step 6, the two tray keys are selected. To change the
tray for cover, see step 7.
12
Select the Simplex/Duplex copy mode according to the original type.
% Select [1->2] or [2->2] according to the original type placed in the ADF in step 1.
13
Select any other copy conditions, as desired.
% Page Space: When making half-folded or folded and stapled, and fore-edge-trimmed booklets, the
space from the trimmed edge to the printed image may gradually widen from the inner pages to the
outer pages. In this case, use the Page Space function in Page Margin in combination. See
page 5-20 for details.