Konica Minolta bizhub PRESS C8000e - Manual (Page 288)

bizhub PRESS C8000 8-7
8.4 Storing and Recalling Job Conditions: Mode Memory 8
6
Press [OK].
The Mode Memory Screen will be restored.
7
Press the desired job key, then press [OK].
The Job Name Setting Screen will be displayed.
% A blank key without name or lock icon (
) indicates that no job is stored under that key.
% A named job without a lock icon (
) can be overwritten.
% The key with a lock icon (
) is locked and cannot be selected.
8
Enter a job name, then press [OK].
% You may enter up to 16 alphanumeric characters including symbols for the name.
% Press [OK] to return to the Mode Memory Screen. Check that the job name has been correctly en-
tered on the job key.
% Please make sure that you specify a name for the job. Pressing [OK] will not restore the Mode Mem-
ory Screen unless you specify a job name.