Konica Minolta bizhub PRESS C8000e - Manual (Page 188)

bizhub PRESS C8000 6-24
6.5 Using Folding Unit FD-503 6
6.5.2 Punching File Holes in Copies: Punch
Punches file holes in output sheets. Follow the procedure below to select 2- or 4-hole punch and punch po-
sition.
1
Position the original.
2
Press [COPY] tab to display the Copy Screen.
3
Press [Output Setting].
The Output Setting Screen will be displayed.
4
Press [Punch].
The Punch Screen will be displayed.
5
Press the desired key to select the punch type and position.
6
Press [OK].
% To restore the previous setting, press [Cancel]. To cancel the Punch function with the current setting
saved, press [Function OFF].
The Output Setting Screen will be restored.
7
Press [OK] on the Output Setting Screen.
An icon representing specified output mode will be displayed under [Output Setting] on the Copy
Screen.
NOTICE
The finisher tray has a limit in capacity. Be careful not to exceed the limit, otherwise unexpected trouble
may be caused.