Konica Minolta bizhub PRESS C8000e - Manual (Page 199)

bizhub PRESS C8000 6-35
6.7 Using Perfect Binder PB-503 6
2
Position the original.
For the original available in perfect binding, see page 6-30.
3
Load paper for body sets in a tray.
The following trays are available for body sets:
Tray 1 to Tray 9
4
Load paper for covers in a tray.
To print on covers, use trays 1 to 9 also for covers.
If cover printing is not required, use the following trays.
Cover tray of Perfect Binder PB-503
Upper/Lower tray of Folding Unit FD-503 post inserter
NOTICE
Use custom paper size for cover. Entering length and width is required. Be sure to check precise di-
mensions of cover sheets to be used.
If cover trimming is desired, be sure to use the paper size that secures 5 mm to 40 mm of trimming
width.
5
Press [COPY] tab to display the Copy Screen.
6
Press the tray key loaded with paper for body sets.
The paper size will be detected automatically.
7
Change the paper setting, as required.
If the paper weight specified for the selected tray is inadequate for body set, the binding operation can-
not be performed.