Konica Minolta bizhub PRESS C8000e - Manual (Page 156)

bizhub PRESS C8000 5-22
5.7 Adjusting Position of Copy Image: Page Margin 5
% Shift amount can be specified within the range from 0 to 250 mm in 0.1 mm increments.
% Shift direction should be based on [Direction] specified on the Copy Screen.
7
To specify the shift amount individually for the front and back sides, select either [Front Side] or [Back
Side] under [Image Side], then enter the shift amount for each as described in step 6.
8
To use the Page Space function, select [Page Space] and enter the desired page space amount.
% The [Page Space] key appears clear on the screen only when Booklet or [2 Repeat] mode of Image
Repeat has already been selected.
% Page space amount can be specified within the range from 0 to 250 mm in 0.1 mm increments.
% For the page space amount, shift direction is not needed to be specified.
9
Press [OK] to complete the setting.
% To restore the previous setting, press [Cancel]. To cancel the Page Margin function with the current
setting saved, press [Function OFF].
10
Press [OK] on the Application Screen.
The Page Margin icon and key will be displayed under [Application] on the Copy Screen. Use this key
to directly jump to the Stamp adjustment screen, if any setting change is desired.
11
Enter the desired print quantity from the control panel keypad.
12
Press Start on the control panel.
% You cannot output unless you return to the Copy Screen. Please make sure to display the Copy
Screen.
What is Page Space?
Page Space function is available only when Booklet or 2 Repeat mode of Image Repeat has already been
selected. Use this function to make the desired amount of blank space between the two images on a page.
Booklet Page Space
2 Repeat mode of Image Repeat Page Space