Konica Minolta bizhub PRESS C8000e User Manual
Page 58
bizhub PRESS C8000
3-20
3.3
Separate Scan Mode
3
4
Press Start on the control panel.
The machine starts scanning the original.
5
Replace the original, then press Start on the control panel.
Repeat steps 3 and 4 for all original pages to be scanned.
% To delete the scanned data without printing or to suspend the printing job, press Stop on the con-
trol panel.
% Memory indicator at the upper right corner of the Copy Screen allows you to check the remaining
memory.
6
When scanning is completed, press [Separate Scan] to deselect the key.
The message [Press [Start] to copy] will be displayed.
7
Enter the desired print quantity, then press Start on the control
panel.
All the data in memory will be output.
% Please refer to page 2-19 for details on entering the print
quantity.
% To suspend the printing job, press Stop on the control pan-
el. See page 2-22 for details.