Konica Minolta bizhub PRESS C8000e - Manual (Page 208)

bizhub PRESS C8000 6-44
6.8 Using Large Capacity Stacker LS-505 6
2
Open the large capacity stacker door.
% Once the stacker holds a sheet of output paper, the large
capacity stacker door will be locked and cannot open till the
stacker unit goes down fully to the carriage.
3
Withdraw the carriage by holding its handle.
NOTICE
Be sure to withdraw the carriage straightforward. Do not
change the direction forcibly while driving it. The carriage is for
the exclusive use of carrying paper. Do not drive it in any other
use. Never put yourself in the large capacity stacker.
4
Remove paper from the carriage.
The stacker unit can be removed from the carriage.
NOTICE
Once lowering the stacker unit for the purpose of removing mis-
handled paper or checking output sheets, copying cannot be
started till output sheets are removed. If the carriage is returned
with any sheets left on the stacker unit, machine trouble may be
caused. Be sure to remove all the sheets.
5
Return the carriage to its original position, then close the large
capacity stacker door.
NOTICE
When returning the stacker unit to its original position, fit the
two projections of the carriage to the two holes of the stacker
unit. If the stacker unit is not properly set, the carriage cannot
be returned to its original position.