Konica Minolta bizhub PRESS C8000e - Manual (Page 212)

bizhub PRESS C8000 6-48
6.9 Using Finisher FS-612 6
6.9 Using Finisher FS-612
Finisher FS-612 has a primary (main) tray and a secondary (sub) tray, each of which provides the following
output modes.
Output to the primary (main) tray
Combining with the output modes above except staple mode, you can also select the desired Face ([Face
Up] or [Face Down]) and Order ([1 to N] or [N to 1]), as needed.
Output to the secondary (sub) tray
Combining with the output modes above, you can also select the desired Face ([Face Up] or [Face Down])
and Order ([1 to N] or [N to 1]), as needed.
Output mode Description
[Offset Sort] Outputs the specified number of sorted sets offset by approx. 30 mm upon
exit. Copies can also be offset by specified number of sorted sets, from 1
to 9,999.
[Sort] Outputs multiple copies of the original set. Copies are stacked upon exit
without being offset.
[Offset Group] Groups together multiple copies of each original and offsets the sets upon
exit. Copies can also be offset by specified number of grouped sets, from
1 to 9,999.
[Group] Groups together multiple copies of each original. Copies are stacked upon
exit without being offset.
[Staple] (+ [Sort]) Outputs each sorted set, stapling it automatically upon exit. Selecting [Sta-
ple] automatically selects [Sort] at the same time.
Original Output
Example
Make 3 printed
sets from 4
original sheets Offset Sort Sort Offset Group Group
Offset by
specified
number of
sets Offset by
specified
number of
sets
Corner Staple 2 Position Staple
Left Corner Right Corner Left Top Right
Output mode Description
[Sort] Outputs multiple copies of the original set. Copies are stacked upon exit
without being offset.
[Group] Groups together multiple copies of each original. Copies are stacked upon
exit without being offset.