Konica Minolta bizhub PRESS C8000e - Manual (Page 341)

bizhub PRESS C8000 10-33
10.4 [02 User Setting] - [02 Initial Setting] 10
10.4 [02 User Setting] - [02 Initial Setting]
10.4.1 [01 Copy Initial Setting]
Besides the factory default setting (Full Auto), you can specify the desired copy conditions to be used as the
default setting.
To resume your selections as default when the machine is reset, select [02 User Setting] - [01 System Setting]
- [04 Reset Setting] - [02 Job Reset Setting] in sequence, and then select [Initialize] for Reset Button Function
and [OFF] for Mode Memory Auto Recall.
1
Follow the procedure on page 10-2 to display the User Setting Menu Screen.
2
Press [02 Initial Setting] and [01 Copy Initial Setting] in sequence.
3
Specify the initial setting for each of following items: Original Setting, Quality Adjustment, Zoom, Auto
Zoom, Simplex/Duplex, Output Setting, Color, paper tray selection, Auto Paper, Image Rotation OFF,
and Hold Setting. Follow the same procedure as setting them from the Copy Screen.
% Press [ADF] to specify the ADF mode as the initial setting.
% Application and Paper Setting cannot be specified.
4
Press [OK] to complete the setting.
% To cancel the change, press [Cancel].
In either case, the Initial Setting Menu Screen will be restored.
10.4.2 [02 Scan Initial Setting]
Besides the factory default setting (Full Auto), you can specify the desired scanning conditions to be used as
the default setting.
To resume your selections as default when the machine is reset, press [02 User Setting] - [01 System Setting]
- [04 Reset Setting] - [02 Job Reset Setting] in sequence, and then select [Initialize] for Reset Button Function.