Konica Minolta bizhub PRESS C8000e - Manual (Page 75)

bizhub PRESS C8000 3-37
3.6 Paper Setting 3
9
Press [OK] on the Recall Screen.
The Paper Setting Screen will be restored.
% The paper profile name will change to that of recalled specifications.
Proceed to step 31, if no setting change is desired for recalled specifications.
10
Press [Change Set].
11
Select the desired one from the keys under [Paper Type].
% You can select [Coated-GL], [Coated-ML], [Coated-GO], and [Coated-MO] when you set the value
of [Weight] more than 81 g/m
2
.
% The paper type setting is required for the upper tray [PI 1] and lower tray [PI 2] of the post inserter
mounted on Folding Unit FD-503, when those trays are loaded with covers for perfect binding to
be made on the machine equipped with Perfect Binder PB-503. This setting is not required when
they are loaded with paper other than covers for perfect binding.
% The upper tray [PI1] and lower tray [PI2] of Post Inserter PI-502 mounted on Finisher FS-612 do
not require the paper type setting on the Paper Setting Screen.
12
Press [Paper Size].
The Size Setting Screen will be displayed.
13
Select the desired one from [Standard], [Custom], and [Tab Paper].
Proceed to step 14 for setting [Standard].
Proceed to step 15 for setting [Custom].
Proceed to step 16 for setting [Tab Paper].
% [Tab Paper] will not be displayed with [PI 1] or [PI 2] selected in step 5.
% [Standard] and [Tab Paper] will not be displayed with [PB] selected in step 5.