Konica Minolta bizhub PRESS C8000e User Manual
Page 201
bizhub PRESS C8000
6-37
6.7
Using Perfect Binder PB-503
6
% Selecting one from [Tray 1] to [Tray 9] enables the covers to be printed.
% Cover printing is unavailable if [PI 1], [PI 2], or [PB] is selected.
11
Press [Change Paper Setting].
The Paper Setting Screen will be displayed.
% This paper setting step is not necessary if the tray selected in step 10 has already been set for the
covers. Proceed to step 13.
% Paper setting for covers is also available from the Machine Screen or Copy Screen. Perform the pa-
per setting procedure after step 4, if desired.
12
Change the paper setting of the tray loaded with covers.
% For detailed procedure of paper setting on the Paper Setting Screen, see page 3-31.
13
Press [Close].
The Cover Tray Screen will be restored.
14
Press [OK].
The Perfect Bind Screen will be restored.
15
Make the cover print setting.
Select [ON] on the right side of [Cover Print], if cover printing is desired.