Konica Minolta bizhub PRESS C8000e - Manual (Page 226)

bizhub PRESS C8000 6-62
6.10 Using Multi-Punch GP-501 6
0 Available paper size is A4 v only. A4 w cannot be used for this function.
0 A power switch is provided on the multi punch. Be sure to turn it on before turning on the main power
switch and sub power switches of the main body.
0
The die set model currently mounted on the multi punch cannot be checked from the control panel. If
required, open the front door of the multi punch to check it before the operation.
1
Position the original.
2
Press [COPY] tab to display the Copy Screen, then press [Output Setting].
The Output Setting Screen will be displayed.
3
Press [Punch].
The Punch Screen will be displayed.
4
Press the desired key under [Multi Punch] to select the punch position.
5
Press [OK].
% To restore the previous setting, press [Cancel].
% To cancel the Punch function with the current setting saved, press [Function OFF].
The Output Setting Screen will be restored.
6
Press [OK] on the Output Setting Screen.