Konica Minolta bizhub PRESS C8000e - Manual (Page 291)

bizhub PRESS C8000 8-10
8.5 Recalling Previous Job Settings 8
8.5 Recalling Previous Job Settings
Follow the procedure below to copy with the previous job settings.
0
When recalling the previous job settings, first display the Copy Screen before pressing Mode Memory
on the control panel. This function is unavailable from any other screen such as the Machine Screen.
0 Only the last-completed output job settings can be recalled as the previous job settings. Incomplete
job or reserve job settings cannot be recalled, even if the setting operation has been made last.
0 The previous job settings can be recalled even after the machine sub power is turned off then on.
1
Position the original.
2
Press [COPY] tab to display the Copy Screen.
3
Press Mode Memory on the control panel.
The Mode Memory Screen will be displayed.
4
Press [Pre-Job Recall].
The [Program Check] key becomes available on the Mode Memory Screen.
5
Press [Program Check].
The Mode Check Screen will be displayed.
% The screen allows you to check the previous job settings.
6
Press [OK] on the Mode Check Screen.
The settings of the previous output job will be recalled on the Copy Screen.
7
Enter the desired print quantity, then press Start on the control panel.