Konica Minolta bizhub PRESS C8000e - Manual (Page 316)

bizhub PRESS C8000 10-8
10.1 Utility Menu Screen Outlines 10
[Needless Tab Paper Exit]
Specify whether or not to automatically discharge
the oddments of tabbed sheets loaded in a tray as
a set. ON, OFF
[Detect Double Feed JAM]
Specify whether or not to detect the double feed-
ing. ON, OFF
[Fusing Stability (Quick Start)]
Specify whether or not to wait till the machine
completes the warmup to meet controlled tem-
perature conditions for a specified tray when a
print job is queued. Speed, Image Quality
[Fusing Stability (Mixed Media)]
Specify whether or not to wait till the machine
completes the warmup for a tray to be switched
from the one currently used, if they have different
temperature while operating a print job with mul-
tiple trays specified. Speed, Image Quality, Best Quality
[04 Copy Setting]
[Fold & Staple Auto Selection]
Specify whether or not to automatically set the
Booklet mode when Fold & Staple mode is select-
ed. ON, OFF
[Orig. Glass Auto Size Select]
Specify whether or not to automatically select the
same size of copy paper as the original when
placed on the original glass. ON, OFF
[ADF Auto Size Select]
Specify whether or not to automatically select the
same size of copy paper as the original when
placed on the ADF. ON, OFF
[Auto Zoom (Original Glass)]
Specify whether or not to automatically set an ap-
propriate magnification ratio to correspond to the
selected paper size when detecting the original
size placed on the original glass. ON, OFF
[Auto Zoom (ADF)]
Specify whether or not to automatically set an ap-
propriate magnification ratio to correspond to the
selected paper size when detecting the original
size placed on the ADF. ON, OFF
[Non-Image Area Erase]
Specify the condition of Non-Image Area Erase
function to be activated when Image Centering is
selected in Application. Yes, APS/AMS, Except Orig. Glass (1:1)
[ADF Frame Erase]
Set to erase the frame when copying in ADF
mode. None, 1 mm, 2 mm, 3 mm, 4 mm, 5 mm
[Interruption Suspend Setting]
Set the timing to interrupt the current job when
pressing Interrupt while copying. Stop Immediately, When Current Comp.
[Printer Prohibit Timer]
Set the time interval to suspend the print job via
PC after the last operation of touch keys. OFF, 15 seconds, 30 seconds, 60 sec-
onds, 90 seconds
[Orig./Out Bind Direction Set]
Specify whether or not to conform the bind direc-
tion in Output Setting with that specified in Origi-
nal Setting. ON, OFF
[Specify Default Tray APS OFF]
Specify the tray to be automatically selected
when APS (Auto Paper) is canceled. APS Tray, Tray 1, Tray 2, Tray 3, Tray 4,
Tray 5, Tray 6, Tray 7, Tray 8, Tray 9
Menu Item/Description Setting options (with default bolded)