Konica Minolta bizhub PRESS C8000e - Manual (Page 327)

bizhub PRESS C8000 10-19
10.1 Utility Menu Screen Outlines 10
[06 Post Inserter Tray Size]
This menu item is to be displayed and al-
lowed on the machine mounted with Post
Inserter PI-502, which is to be mounted
on Finisher FS-612.
Adjust the tray size of post inserter. Objects of adjustment:
Upper tray: A4
w, 8.5 e 11 w
Lower tray: A4 w, 8.5 e 11 w
*
[07 Output Quantity Limit]
Specify the limit on output sheets. Objects of adjustment:
Staple/64-80 g/m
2
, Staple/81-105 g/m
2
,
Staple/106-209 g/m
2
, Fold & Staple/64-80
g/m
2
, Fold & Staple/81-105 g/m
2
, Half-
Fold/64-105 g/m
2
, Tri-Fold/64-80 g/m
2
Adjustable range:
+2 to +50 (1 step = 1 sheet)
*
[04 Finisher Adjustment] (Relay Unit RU-506)
This menu item is to be displayed and allowed on the machine mounted with Relay Unit RU-506,
which is to be installed along with Multi Punch GP-501.
08 Relay Stacker Adjustment
01 Paper Width Adjustment
Adjust the width of adjustment plates
of Relay Unit RU-506. Object of adjustment: 8.5 e 11 v
Adjustable range:
-20 (Narrow) to +20 (Wide)
(1 step = 0.1 mm)
*
02 Paper Length Adjustment
Adjust the position of the front stopper
if punch holes show misalignment in
paper feed direction when using Relay
Unit RU-506. Object of adjustment: 8.5
e 11 v
Adjustable range:
-50 to +50
(1 step = 0.1 mm)
*
[05 Scan Adjustment]
Make adjustments related to the scanning
function.
[01 Restart Timing Adjustment]
Adjust the position to start scanning when
using the original glass to scan the origi-
nal.
Prerequisite: FD-Mag. Adjustment is com-
pleted. Objects of adjustment:
Scanning device of the original glass
Adjustable range:
-10 (Image Fast) to +20 (Image Slow)
(1 step = 0.1 mm) *
[02 Centering Adjustment]
Adjust the image position in crosswise di-
rection when scanning the original from
the original glass.
Prerequisite: Printer Centering Adjustment
is completed. Objects of adjustment:
ADF Centering-Front, ADF Centering-
Back
Adjustable range:
-60 (Front) to +60 (Back)
(1 step = 0.1 mm)
Objects of adjustment:
Orig. Glass Centering
Adjustable range:
-30 (Front) to +30 (Back)
(1 step = 0.1 mm) *
[03 FD-Mag. Adjustment]
Adjust the magnification in paper feed di-
rection when scanning the original from
the original glass.
Prerequisite: Printer FD-Mag. Adjustment
is completed. Objects of adjustment:
Scanning device of the original glass
Adjustable range:
-40 (Short) to +40 (Long)
(1 step = 0.05%) *
[06 Process Adjustment]
[01 Front & Back Density]
Specify the adjustment value for front and
back transfer output voltage automatically
set by the machine. Objects of adjustment:
1st Transfer Y, 1st Transfer M, 1st Transfer
C, 1st Transfer K, 2nd Transfer Front, 2nd
Transfer Back, 2nd Transfer Postcard Rear
Adjustable range:
-3 to +3 *
Menu Item/Description Setting options (with default bolded)