Konica Minolta bizhub PRESS C8000e - Manual (Page 320)

bizhub PRESS C8000 10-12
10.1 Utility Menu Screen Outlines 10
[03 FD-Mag. Adjustment]
This adjustment value will be the standard
for Both Sides Adjust in Paper Setting.
Adjust the magnification in paper feed di-
rection in the printer engine.
Prerequisite:
Registroller line speed adjustment is com-
pleted. Objects of adjustment:
Printer FD-Mag.
Adjustable range:
-100 to +100 (1 step = 0.01%)
Objects of adjustment:
Tray 1 Offset (ADU) to Tray 9 Offset (ADU)
Adjustable range:
-80 to +20 (1 step = 0.01%) *
[04 CD-Mag. Adjustment]
Adjust the magnification in crosswise di-
rection in the printer engine. Objects of adjustment:
Printer CD-Mag., Tray 1 Offset (ADU) to
Tray 9 Offset (ADU)
Adjustable range:
-100 to +100 (1 step = 0.01%) *
[05 Lead Edge Erase Adjustment]
Adjust the amount of image to be erased
from the edge of the sheet. Object of adjustment: Erase amount
Adjustable range:
-20 to +40 (1 step = 0.1 mm)
[06 Registration Loop Adj.]
Adjust the paper loop amount in registra-
tion roller section. Objects of adjustment:
Tray 1 Large Size to Tray 9 Large Size, Tray
1 Small Size to Tray 9 Small Size, ADU
Large Size, ADU Small Size, ADU Plain/W
Under 150 mm, ADU Thick/W Under 150
mm, Thick
Adjustable range:
-99 to +99 (1 step = 0.1 mm) *
[07 Pre-registration Adj.]
Adjust the paper loop amount in pre-regis-
tration roller section of the trays. Objects of adjustment:
Tray 1 to Tray 3, ADU Large Size, ADU
Small Size
Adjustable range:
-99 to +99 (1 step = 0.1 mm) *
[04 Finisher Adjustment] (Finisher FS-521)
This menu item is to be displayed and allowed on the machine mounted with Finisher FS-
521.
[01 Staple Finisher Adjustment]
[01 Staple Center Position]
Adjust the center position of staples
determined by the finisher.
Prerequisite: Paper Width Adjustment
(Staple) is completed. Adjustable range:
-20 (Forward) to +20 (Backward)
(1 step = 0.1 mm) *
[02 Paper Width Adj. (Staple)]
Adjust the width of stacker adjustment
plates of the finisher to be used in Sta-
ple mode. Objects of adjustment:
Full Area, SRA3
w, A3 w, B4 w, SRA4
w/v, A4 w/v, B5 v, A5 v, 12 e 18 w, 11 e
17
w, 8.5 e 14 w, 8.5 e 11 w/v, 8.125 e
13.25 w, 8.5 e 13 w, 8.25 e 13 w, 8 e 13
w, 8K w, 16K v, 9 e 11 v, Custom (380-
460 mm), Custom (220-379 mm), Custom
(148-219 mm)
Adjustable range:
-20 (Wide) to +20 (Narrow)
(1 step = 0.1 mm)
*
[03 Paper Width Adj. (Straight)]
Adjust the width of stacker adjustment
plates of the finisher to be used in
straight delivery. Objects of adjustment:
Full Area, SRA3
w, A3 w, B4 w, SRA4
w/v, A4 w/v, B5 v, A5 v, 12 e 18 w, 11 e
17
w, 8.5 e 14 w, 8.5 e 11 w/v, 8.125 e
13.25 w, 8.5 e 13 w, 8.25 e 13 w, 8 e 13
w, 8K w, 16K v, 9 e 11 v, Custom (380-
460 mm), Custom (220-379 mm), Custom
(148-219 mm)
Adjustable range:
-20 (Wide) to +20 (Narrow)
(1 step = 0.1 mm)
*
Menu Item/Description Setting options (with default bolded)