Konica Minolta bizhub PRESS C8000e - Manual (Page 74)

bizhub PRESS C8000 3-36
3.6 Paper Setting 3
The Paper Setting Screen will be displayed.
5
Press the tray key to change the setting.
% Tray keys are provided in the left side area of the Paper Setting Screen. Pressing a tray key shows
the conditions specified for that tray.
6
Press either [Recall] or [Change Set].
Pressing [Recall] displays the Recall Screen, on which paper specifications registered for each paper
can be selected. Proceed to step 7.
Pressing [Change Set] displays the Change Individual Set Screen to change the specifications individ-
ually. Proceed to step 11.
7
Press [
+] or [,] on the screen to scroll to the entry of the desired specifications in the list, then press
the entry.
The selected entry will be highlighted.
% If registered specifications do not match with those of the selected tray, that entry will be grayed
out to show unavailability. In this case, change the tray to be used.
8
Press [Confirm Details].
Details of the selected entry will be displayed. When finished with checking, press [Close].