Konica Minolta bizhub PRESS C8000e - Manual (Page 237)

bizhub PRESS C8000 7-5
7.2 Hold Job and HDD Store Job 7
7.2 Hold Job and HDD Store Job
The machine can temporarily store job data scanned from the ADF or from the original glass into memory,
and then allows you to check them on the Job List Screen for output or saving them on an HDD.
The jobs stored on HDD can be output from the HDD Recall Screen, returned to the Hold Job Screen, and
also deleted from the HDD.
This section describes how to output, duplicate, and delete the hold jobs from the Hold Job Screen of the
Job List Screen, to store the jobs on the HDD (HDD Store), and also to edit the jobs (Job Edit). Procedures
to be performed on the HDD Recall Screen are also provided, such as printing, recalling, and deleting the
jobs stored on the HDD.
d
Reference
See page 3-54 for how to temporarily store the data scanned from the ADF or from the original glass.
NOTICE
The machine can be set to encrypt hold job data to store them on the HDD for prevention of information leaks.
Contact your service representative, if desired.
7.2.1 Hold Job Screen of the Job List Screen
No. Name Description
1 [Hold Job] Pressed to display the Hold Job Screen.
2 [JOB LIST] tab Pressed to display the Job List Screen which allows you an access
to the Hold Job Screen.
3 Preview icon Displays the first page of the hold job as an icon. If a password has
been created on the Hold Job Screen, a lock mark appears instead
of the preview icon.
Pressing the title section of the preview icon will sort the list by type
of the icon.
4 [File Name] Displays the file name of a hold job. If a specific file name has been
entered on the Hold Job Screen, that name will be displayed. If no
entry has been made, the last 4 digits of the job ID will be displayed.
The jobs having the same name will be marked on the right side.
The file name of the job with a password created will not be dis-
played.
Pressing the title [File Name] will sort the list by file name.