Konica Minolta bizhub PRESS C8000e - Manual (Page 334)

bizhub PRESS C8000 10-26
10.1 Utility Menu Screen Outlines 10
[Interruption Suspend Setting]
Set the timing to interrupt the current job when
pressing Interrupt while copying. Stop Immediately, When Current Comp.
[Printer Prohibit Timer]
Set the time interval to suspend the print job via
PC after the last operation of touch keys. OFF, 15 seconds, 30 seconds, 60 sec-
onds, 90 seconds
[Orig./Out Bind Direction Set]
Specify whether or not to conform the bind direc-
tion in Output Setting with that specified in Origi-
nal Setting. ON, OFF
[Specify Default Tray APS OFF]
Specify the tray to be automatically selected
when APS (Auto Paper) is canceled. APS Tray, Tray 1 to Tray 9
[Scan Stop by Pull Out Tray]
Specify whether or not to stop the scanning oper-
ation if any tray is pulled out. ON, OFF
[08 Scan Setting]
[File Type Default E-mail]
Specify the default file type when sending
scanned data in e-mail. Setting options vary with the image con-
troller mounted on the machine. See
page 10-88 for details.
[File Type Default HDD]
Specify the default file type when sending
scanned data to HDD.
This function is available only on the machine
mounted with Image Controller IC-307. Setting options vary with the image con-
troller mounted on the machine. See
page 10-88 for details.
[File Type Default FTP]
Specify the default file type when sending
scanned data via FTP. Setting options vary with the image con-
troller mounted on the machine. See
page 10-88 for details.
[File Type Default SMB]
Specify the default file type when sending
scanned data via SMB. Setting options vary with the image con-
troller mounted on the machine. See
page 10-88 for details.
[Default Address]
Select the default destination to be displayed on
the Scan Screen. Setting options vary with the image con-
troller mounted on the machine. See
page 10-88 for details.
[Compress Method Color/Gray]
Specify the compression method to be used for
scanned color/grayscale image data. Setting options vary with the image con-
troller mounted on the machine. See
page 10-88 for details.
[09 System Connection]
[01 Administrator Call]
Press [Start] to call your service representative via
CS Remote Care. Start *
[10 Security Setting]
[01 Administrator Password]
Change the administrator password. 12345678 *
[02 HDD Management Setting]
Make settings concerning the security manage-
ment of the HDD.
[01 HDD Lock Password]
Change the HDD lock password. -
[02 Delete Temp. Data Setting]
Specify whether or not to overwrite the tempo-
rary image data, and also the erase mode. Setting Switch: ON, OFF
Erase Mode: Mode 1, Mode 2
[03 Delete All Data Setting]
Select the desired erase mode to delete all the
data. Erase Mode: Mode 1 to 8
[04 Delete hold Job]
Use this function to delete hold jobs. -
Menu Item/Description Setting options (with default bolded)