Konica Minolta bizhub PRESS C8000e - Manual (Page 361)

bizhub PRESS C8000 10-53
10.9 [03 Administrator Setting] - [01 System Setting] 10
13
Press [Exit Print Mode] to return to the Printer Gamma Offset Adjustment Screen.
14
Repeat the steps from 9 to 12 until the desired result is obtained.
15
Press [Return] to restore the Printer Adjustment Menu Screen.
10.9.12 [05 Expert Adjustment] - [07 Quality Adjustment] - [02 Printer Gamma Offset
Auto.]
Change the printer gamma curve automatically to adjust the gradation and background density in highlights.
Use this function when the color reproducibility varies depending on the selection of screen for each of [Line
1], [Line 2], [Dot 1], [Dot 2], and [Stochastic].
NOTICE
Make this adjustment after operating [Gamma Automatic Adj.] of [02 Execute Adjust Operation] from the Ad-
justment Menu Screen or [Gamma Automatic Adj.] of [05/08 Execute Adjust Operation] in the Utility mode to
complete the gamma automatic adjustment. For details of [Gamma Automatic Adj.], see Section 8 or Section
9 of the User's Guide - Main Body.
NOTICE
Please use plain paper or white paper for color printing in this adjustment. Using colored paper cannot make
this adjustment properly, affecting the color of output test pattern.
NOTICE
Normally, this adjustment is made as the printer gamma adjustment. Perform [01 Printer Gamma Offset Adj.]
if fine adjustment is needed. This adjustment should be made for the machine with the ADF equipped; for the
machine without ADF, also perform [01 Printer Gamma Offset Adj.] to make the printer gamma adjustment.
See page 10-51 for details.