Konica Minolta bizhub PRESS C8000e - Manual (Page 159)

bizhub PRESS C8000 5-25
5.8 Printing Additional Information: Stamp 5
6
Press [OK] twice to complete the setting.
% To restore the previous setting, press [Cancel].
% To cancel the Stamp function with the current setting remained, press [Function Off].
7
Press [OK] on the Application Screen.
The Stamp icon and key will be displayed under [Application] on the Copy Screen. Use this key to di-
rectly jump to the Stamp adjustment screen, if any setting change is desired.
8
Enter the desired print quantity from the control panel keypad.
9
Press Start on the control panel.
% You cannot output unless you return to the Copy Screen. Please make sure to display the Copy
Screen.
5.8.2 Printing Page Number: Page No.
Print a page number onto the specified position of copies.
1
Position the original.
2
Press [Application] on the Copy Screen.
3
Press [Stamp] on the Application Screen.
4
Press [Page No.].