Konica Minolta bizhub PRESS C8000e - Manual (Page 176)

bizhub PRESS C8000 6-12
6.3 Using Finisher FS-521 6
This section describes the following output modes:
-
Sort/Group/Offset Sort/Offset Group output to the primary (main) tray
-
Staple output to the primary (main) tray
-
Sort/Group output to the secondary (sub) tray
6.3.1 Sorting Copies: Sort/Group/Offset Sort/Offset Group
A machine installed with Finisher FS-521 is initially set to output sorted sets to the primary (main) tray, re-
gardless of whether or not to be equipped with other options.
Please select an output mode by following the procedure below.
d
Reference
You can change the initial output mode from the Utility menu. See page 10-33 for details.
1
Position the original.
2
Press [COPY] tab to display the Copy Screen.
3
Press [Output Setting].
The Output Setting Screen will be displayed.
Output tray positions are indicated as square marks on the front image of the machine, and the tray
currently selected appears highlighted. If the primary (main) tray is not selected, press the key to high-
light it.
4
Select the desired output mode.
% Select one of [Offset Sort], [Sort], [Offset Group], and [Group] keys provided under [Output].
Original Output
Example
Make 3
printed sets Sort Group
Face Up
and 1 to N Face Up
and N to 1 Face Down
and 1 to N Face Up
and 1 to N Face Up
and N to 1 Face Down
and 1 to N