Konica Minolta bizhub PRESS C8000e User Manual
Page 178
bizhub PRESS C8000
6-14
6.3
Using Finisher FS-521
6
6.3.2
Sorting Copies Output to Secondary (sub) tray: Sort/Group
A machine installed with Finisher FS-521 is initially set to output sorted sets to the primary (main) tray, re-
gardless of whether or not to be equipped with other options. Follow the procedure below to change the out-
put tray and select the desired output mode.
1
Position the original.
2
Press [COPY] tab to display the Copy Screen.
3
Press [Output Setting].
The Output Setting Screen will be displayed.
4
Select the secondary (sub) tray as output tray.
Press the tray position key "
" of the secondary (sub) tray to highlight it.
5
Select the desired output mode.
% Select either [Sort] or [Group] provided under [Output].
% Select either [Face Up] or [Face Down], and either [1 to N] or [N to 1] provided under [Face/Order],
as needed.
% Selecting [N to 1] automatically sets and limits the Face mode to [Face Up].
6
Press [OK] on the Output Setting Screen.
An icon representing specified output mode will be displayed under [Output Setting] on the Copy
Screen.
% The suspension button provided on Finisher FS-521 will not function while the machine operates
output to the secondary (sub) tray.
NOTICE
The secondary (sub) tray of Finisher FS-521 has a limit in capacity. Be careful not to exceed the limit,
otherwise unexpected trouble may be caused.