Konica Minolta bizhub PRESS C8000e - Manual (Page 186)

bizhub PRESS C8000 6-22
6.5 Using Folding Unit FD-503 6
Be sure that the side guides of the source tray are securely aligned to the paper loaded in that tray. Other-
wise, copies may not be punched in position.
If ATS (automatic tray switch) functions while punching operation is in progress, punch holes may be off the
position.
Punch mode is unavailable for paper sizes other than standard (Detect Size Setting, Custom, Tab paper).
When Folding Unit FD-503 is used as a single finishing option, the primary (main) tray and fold mode tray
are available to be allotted with output modes as described below.
d
Reference
The secondary (sub) tray is also available in place of the fold mode tray. Contact your service representa-
tive, if desired.
6.5.1 Folding Copies: Z-Fold/Tri-Fold-in/Tri-Fold-out/Double Parallel/Gate/Half-
Fold
Copies will be folded in this mode.
Follow the procedure below to select the desired one from six fold types.
0
Fold types: Z-Fold, Tri-Fold-in, Tri-Fold-out, Double Parallel, Gate, Half-Fold
1
Position the original.
2
Press [COPY] tab to display the Copy Screen.
3
Press [Output Setting].
The Output Setting Screen will be displayed.
4
Press [Fold].
Specification Description
Number of punch holes 2 or 4
Hole diameter 6.5 mm +/- 0.5 mm
Hole pitch 80 mm +/- 0.5 mm
Paper size A3 w to A5 v
Paper weight 64 g/m
2
to 128 g/m
2
Tray Output mode
Primary (main) tray Half-Fold, Z-Fold, Punch, not processed (straight delivery)
Fold mode tray Tri-Fold-in, Tri-Fold-out, Double Parallel, Gate