Konica Minolta bizhub PRESS C8000e - Manual (Page 214)

bizhub PRESS C8000 6-50
6.9 Using Finisher FS-612 6
% Select the desired Face ([Face Up] or [Face Down]) and Order ([1 to N] or [N to 1]), as needed.
% Selecting [N to 1] automatically sets and limits the Face mode to [Face Up].
5
Press [OK] on the Output Setting Screen.
An icon representing specified output mode will be displayed on the Copy Screen.
NOTICE
The primary (main) tray gradually goes down while printed materials are output. DO NOT allow any
object to interfere with the operation of the primary (main) tray on the left side of the finisher, as any
interference may cause damage to the finisher.
NOTICE
The primary (main) tray of Finisher FS-612 has a limit in capacity. Be careful not to exceed the limit,
otherwise unexpected trouble may be caused.
6.9.2 Sorting Copies Output to Secondary (Sub) Tray: Sort/Group
A machine installed with Finisher FS-612 is initially set to output sorted sets to the primary (main) tray, re-
gardless of whether or not to be equipped with other options. Follow the procedure below to change the out-
put tray and select the desired output mode.
1
Position the original.
2
Press [COPY] tab to display the Copy Screen.
3
Press [Output Setting].
The Output Setting Screen will be displayed.
4
Select the secondary (sub) tray as output tray.