Konica Minolta bizhub PRESS C8000e - Manual (Page 223)

bizhub PRESS C8000 6-59
6.9 Using Finisher FS-612 6
6.9.7 Using Finisher FS-612 Manually
Finisher FS-612 mounted with Post Inserter PI-502 can be operated manually with the operation panel
provided on the post inserter.
Place paper in the lower tray of the post inserter. Upper tray cannot be used.
Finisher FS-612 provides the following output modes according to the optional configuration.
0 Paper should be placed only in the lower tray. Upper tray cannot be used.
Output mode Description
Finisher FS-612 + Post Inserter PI-502 Corner Staple/2 Position Staple, Fold & Staple,
Tri-Fold
Finisher FS-612 + Post Inserter PI-502 + Punch Kit
PK-512/PK-513 Corner Staple/2 Position Staple, Fold & Staple,
Tri-Fold, Punch
Button Output
Staple mode selection button Fold & Staple Corner Staple 2 Position Sta-
ple Tri-Fold
Punch button
Description Paper (Size/Weight) Number of sheets
loaded Output
tray
Corner Staple/2 Posi-
tion Staple A3
w, B4 w, A4 w/v, B5 w/v, A5 v,
11
e 17 w, 8.5 e 14 w, 8.5 e 11 w/v,
5.5
e 8.5 v (60 to 105 g/m 2
)
Up to two 200 g/m
2
covers can be
attached.
50 sheets or less Primary
(main) tray
Punch A3 w to A5 v (60 g/m 2
to 128 g/m
2
) 200 sheets (80 g/m
2
),
or within 30 mm
Primary
(main) tray
Fold & Staple A3 w, B4 w, A4 w, 11 e 17 w, 8.5 e
14 w, 8.5 e 11 w (60 to 105 g/m 2
)
Only 1 sheet of 200 g/m
2
cover paper
can be attached.
20 sheets max. (80
g/m
2
), 19 sheets max.
(80 g/m
2
), using thick
paper as a cover)
Fold/Sta-
ple mode
tray
Tri-Fold A4
w, 8.5 e 11 w
1 sheet (64 to 105
g/m
2
), 3 sheets (64 to
80 g/m
2
)
Fold/Sta-
ple mode
tray