Konica Minolta bizhub PRESS C8000e - Manual (Page 28)

bizhub PRESS C8000 2-16
2.4 Positioning the Original 2
Do not load more than 100 sheets of the original and do not place originals over the limit line indicated
on the paper guides. The original may be misfed or damaged, or machine trouble may be caused.
2
Position the original FACE UP (with page one UP).
Place mixed size originals aligned with the left rear side of the ADF.
Up to 100 sheets of the original can be set at a time.
3
Adjust paper guides to the original.
NOTICE
Do not open the ADF once you close the ADF. The selected
copy conditions may be altered automatically.
To position the original in Z-Folded mode
The Z-Folded Original mode detects the z-folded original size without using the size detection sensor of the
ADF.
d
Reference
To use the Z-Folded mode, see procedure on page 3-11.
Original sizes available in the Z-Folded mode are described in another section. See page 2-17 for details.
1
Arrange the original in order.
2
Position the original FACE UP (with page one UP).
Up to 100 sheets of the original can be set at a time.
NOTICE
Do not set originals that are bound with staples or paper clips. It could make original become dirty or
rip. See page 2-18 for details.
Do not load more than 100 sheets of the original and do not place originals over the limit line indicated
on the paper guides. The original may be misfed or damaged, or machine trouble may be caused.
3
Adjust paper guides to the original.
NOTICE
Do not open the ADF once you close the ADF. The selected
copy conditions may be altered automatically.