Konica Minolta bizhub PRESS C8000e - Manual (Page 32)

bizhub PRESS C8000 2-20
2.6 Setting Job During Warmup 2
2.6 Setting Job During Warmup
While the machine is warming up after power is turned on, you can select copy conditions and start scanning
so that the machine may start printing immediately the machine engine is ready.
1
Turn ON the sub power switch.
Turn ON the machine by using the sub power switch.
NOTICE
Please do not turn OFF the main power switch. For details on turning on/off the power, please be sure
to consult the User's Guide - Main Body.
2
Press [COPY] tab to display the Copy Screen, then check that the message [Ready to set reserve job]
is displayed.
A few seconds after the Wake-up Screen appears on the touch panel, the Machine Screen with warmup
image will be displayed. Press [COPY] tab to change the Machine Screen to display the Copy Screen,
then check that the message [Ready to set reserve job] is displayed.
3
Position the original FACE UP (with page one UP for double-sided originals) in the ADF. Or, position the
original FACE DOWN on the original glass.
% See page 2-15 for details on positioning the original.
4
Set the desired copy conditions, and enter the print quantity.
5
Press Start on the control panel.
When the machine starts scanning the original, a dialog appears on the Copy Screen.
6
Press either [Yes] or [No] on the dialog.